Mold Removal Marietta GA

If you need Mold Removal in Marietta GA, Southeast Water Restoration is here to help.

Fill out this form or call our hotline for 24 hour service response.
We at Southeast Water Restoration are happy to hear from you.

If you are confronted with the effects of water damage or leaks and end up with the mess that is left, there is the risk of growing mold in your home or business in Marietta GA, and mold removal is essential.

Many people are shocked to discover that mold can be found all over. Microscopically-sized mold spores can be found in the air we breathe, though typically at low and harmless levels.

But, if there are excessive amounts of moisture, usually after an event, such as flood or water damage, mold spores will begin to multiply and then expand. This might result in worst cases, such as black molds growing.

In the words of the EPA, moisture control is the main element in preventing mold. If the water damage occurs to an area that isn’t wholly dried for 24 hours, it is reasonable to be prepared for the possibility of mold growth.

Mold Removal Marietta GA

Call Southeast Water Restoration at your first sign of water damage or mold growth. We are here to help you with your needs.

What Should You Do If You’ve Got Mold in Marietta GA?

Do it as soon as you can. This living organism can multiply and grow when not adequately treated. This could cause significant damage to your home or business or put your family’s health in danger.

1. The first step in dealing with a mold problem is to assess the mold.

It visualizes the degree of water damage and the extent of growth of mold. The evaluation of mold is crucial in determining and identifying the problems with moisture that may be concealed in floors, walls, and construction materials.

2. The next step would be to remove and treat the mold.

This means removing visible mold growth and fixing the water’s cause. According to EPA guidelines, you must be aware of the extent of the issue before deciding the most efficient method to address it.

  • If mold growth is confined to a small, isolated space that isn’t more than ten square feet (approximately 3 square feet), the remediation process can be carried out by trained workers who follow the safest work practices.
  • When the mold size in question is more than 10 square feet in area. It is recommended to hire qualified mold specialists to take care of the task.

If you decide to tackle the job yourself, make sure to go through the Environmental Protection Agency’s Mold Cleanup Tips and Techniques.

Certified Mold Inspection and Removal Services available in Marietta GA

Southeast Water Restoration has years of experience helping residents from Marietta discover and resolve the mold problem that plagues their apartments, offices, homes, and commercial and residential establishments. We are an accredited mold remediation services firm in

Georgia and an assessment expert who can quickly and efficiently solve any mold problem and restore water damage.

Assessments & Inspections for Mold

  • Complete mold inspections with the help of the use of moisture sensors as well as infrared cameras.
  • Air quality testing and sampling

Mold Remediation and Removal

  • Extraction and drying of the water as well as dehumidifying
  • Cleaning and remediation, and removal
  • Water damage restoration and mold damaged repair

All about Marietta Mold Inspections, Assessments, and Testing

The adverse effects of mold, similar to the icebergs, appear to be the most visible. The moisture and the water will quickly pass-through floors, walls, or other gaps in the structure and cause mold to grow even in areas that aren’t obvious.

What is it, as well as why is it significant?

The purpose of an inspection for concerns about mold is to identify areas where the mold and moisture have gathered in the space to create

an overall plan of action to address the issue.

If you don’t know where the mold is located, it is impossible to address the issue and stop it from expanding. This is why mold testing is vital to identify and treat mold-related problems.

It is essential to realize that mold inspections do not correspond to tests for mold designed to detect the kind of mold in the vicinity. The testing for mold isn’t required nor should be considered an alternative to testing. All types of molds need to be eradicated regardless of the kind of mold it is.

Based on the extent of the problem, you can decide to examine the mold problem by yourself or with a professional. This is the best option to ensure you fully comprehend moisture’s situation and create a personalized plan.

The price of professional mold inspections in Marietta GA ranges between $300 and $900, depending on the dimensions of the building and its location.

What exactly is it?

The mold assessment begins by performing a visual examination to evaluate the extent of the growth or damage caused by the moisture. This is the case for exposed surfaces, as well as hidden areas in which the presence of water or mold might be evident like:

  • Inside walls
  • Between the wallpapers and moldings
  • Carpets and flooring are the underlayment for flooring.
  • Crawl spaces
  • Attics
  • Ventilation systems and ducts as well as ducts.
  • Building materials, insulation along with other building materials

Instruments like cameras that detect moisture and infrared lights should be employed to investigate hidden mold or moisture following flooding or leaks.

The air sample isn’t required, but it could be helpful to discover whether there’s a mold problem when the cause of the issue isn’t recognized visually. The samples should be collected with the help of a certified professional and later examined in a laboratory recognized by the federal government.

Once you’ve completed the test, you’ll receive a report of the mold assessment and conclusions, as with a detailed program for removal.

About Marietta Mold Removal and Remediation

The precise procedures and techniques employed to remove mold will depend on the magnitude and extent of the issue. However, the end target remains the same.

  1. Determine the root of the water or moisture issue.
  2. Make sure to eliminate or remove any mold-damaged material.

When is the Best Time to Hire an Expert?

If you’re confronted by mold, you may be able to take care of the issue yourself if you believe you’re knowledgeable or have the appropriate training. Before you decide to go with the DIY method, be aware of these:

  • The presence of moisture and mold is found in areas that aren’t easily accessible.
  • The solutions used to eliminate mold from the office or at home don’t always work in removing all forms of decay within the home.
  • Mold can pose severe health risks when you don’t follow safe work procedures or wear the appropriate safety equipment.
  • A lapse in attention or oversight to the details can lead to the mold spreading and cause the repair to fail, and the cost increases.
  • After the mold has disappeared, the area needs to be cleaned thoroughly, and dead mold needs to be eliminated.

A trained staff member of the department of building maintenance can handle a minor or significant level of mold. But a mold remediation company with excellent knowledge can take on more complex jobs.

The most common rule is to consult an expert on molds if you find any growth zone mold over 10 square feet.

It is essential to consult an expert in the case of significant flooding or leak if the water or moisture is seeping into walls or flooring because there’s a good possibility that mold will grow even in areas that don’t seem to be noticeable.

What exactly is it?

At first, the root causes of the growth must be addressed to prevent it from happening again.

Suppose you’ve experienced recent floods or leaks. In this case, the visible water should be drained, and the affected areas must be thoroughly dried and dehumidified to eliminate water accumulation in surrounding structures.

According to the EPA, the relative humidity in indoor spaces is required to be at a lower level than 60% to prevent and stop the growth of mold. The affected areas need to be removed or cleaned according to the type of substance.

  • Non-porous materials can, at a minimum, always be clean (e.g., glass, metals, or hard plastics)
  • Materials that are semi-porous or porous can clean if structurally solid and robust (e.g., concrete, concrete, wood)
  • The porous materials must be removed and removed (ceiling paneling, tile, and wallboards)

Cleaning is typically done with detergent or soap and gentle cleaning methods to prevent the spread of mold across the area of work. The affected areas are cleaned by vacuums equipped with HEPA filters that eliminate dirt and mold spores.

The Post Mold Removal Checklist

Whichever method you decide to use to address the problem of mold in your workplace or at home, you can use this checklist to ensure that your task is done safely and securely:

Any water or moisture problem(s) is addressed and fixed.

If sampling was conducted and the results were analyzed by a professional with experience.

The work area was separated from the rest of the site to prevent the spreading of mold spores.

A plan to remove mold was created and put into effect.

Additional water damage or mold that was found after remediation was dealt with.

Once the work is completed, the surfaces are free of dust and visible dirt.

Select to work with certified businesses in Marietta certified to provide mold remediation services or assessments, such as Southeast Water Restoration. Our restoration company will offer you an evaluation and proof that the quality assurances mentioned earlier were followed.

If you have any concerns about cleaning or inspections for mold, get in touch with mold removal companies in Marietta GA such as Southeast Water Restoration immediately!